Barker Controls, Inc.
Barker Controls, Inc.
Address: 2205 Old Buncombe Road
Greenville, SC 29609
Phone: 800-845-5274
Fax: 864-242-1134
Email: Sales@BarkerControls.com
Website: www.barkercontrols.com
Print Back
BA Series Diffuse Reflective Long-Distance Photoelectric Sensor
Unit of Measure
Items BA Series Diffuse Reflective Long-Distance Photoelectric Sensor
BA
BA Series Diffuse Reflective Long-Distance Photoelectric Sensor 		BC Series Color Mark Photoelectric Sensor
BC
BC Series Color Mark Photoelectric Sensor 		BEN Series Universal Alternating Current (AC)/Direct Current (DC) Photoelectric Sensor
BEN
BEN Series Universal Alternating Current (AC)/Direct Current (DC) Photoelectric Sensor 		BH Series Front/Side Mount Photoelectric Sensor
BH
BH Series Front/Side Mount Photoelectric Sensor 		BJ Series Rectangular Cable Type Photoelectric Sensor
BJ
BJ Series Rectangular Cable Type Photoelectric Sensor
Description N/A
Brands N/A Autonics
Model N/A BA N/A BC N/A BEN N/A BH N/A BJ
Type N/A Photoelectric Sensor
Sensing Distance N/A 2 m N/A 15 m N/A N/A N/A
Sensing Type N/A Diffuse Reflective N/A Convergent Reflective N/A N/A N/A
Direct Current (DC) Power Supply Voltage N/A 12 to 24 V N/A 12 to 24 V N/A N/A N/A 12 to 24 V
Output N/A Solid State (Transistor) N/A Solid State (Transistor) N/A N/A N/A Solid State (Transistor)
Operation Mode N/A N/A Color Match (Normally Open) - Color Mismatch (Normally Closed) Mode Selectable (Adjuster) N/A Light ON Mode - Dark ON Mode Selectable (Adjuster) N/A Light ON Mode - Dark ON Mode Selectable (Adjuster) N/A
Control Output N/A Negative-Positive-Negative (NPN) open collector output Positive-Negative-Positive (PNP) open collector output N/A Negative-Positive-Negative (NPN) open collector output Positive-Negative-Positive (PNP) open collector output N/A N/A N/A
Response Time N/A ≤ 1 ms N/A 500 µs N/A N/A ≤ 1 ms N/A
Light Source N/A Infrared N/A Full Color (Red, Green, Blue) N/A N/A N/A
Peak Emission Wavelength N/A 850 nm N/A N/A N/A N/A
Connection N/A N/A Connector Type N/A Cable Type N/A Cable Type N/A Cable Type
Indicator N/A N/A N/A Operation Indicator (Red) Power Indicator (Red) Stability Indicator (Green) N/A Operation Indicator (Red) Power Indicator (Green) Stability Indicator (Green) N/A
Insulation Resistance N/A N/A N/A ≥ 20 MΩ (500 VDC, Megger) N/A ≥ 20 MΩ (500 VDC, Megger) N/A ≥ 20 MΩ (500 VDC, Megger)
Dielectric Strength N/A N/A N/A Between the charging part and the case: 1,000 VAC ~ 50/60 Hz for 1 minute N/A Between the charging part and the case: 1,000 VAC ~ 50/60 Hz for 1 minute N/A Between the charging part and the case: 1,000 VAC ~ 50/60 Hz for 1 minute
Vibration N/A N/A N/A 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours N/A 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours N/A 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours
Shock N/A N/A N/A 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times N/A 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times N/A 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times
Protection Circuit N/A N/A N/A N/A Reverse power protection circuit, output short over current protection circuit N/A Reverse power protection circuit, output short over current protection circuit
Ambient Temperature N/A N/A N/A N/A -25 to 55 ºC, Storage: -40 to 70 ºC (No Freezing or Condensation) N/A -25 to 55 ºC, Storage: -40 to 70 ºC (No Freezing or Condensation)
Ambient Humidity N/A N/A N/A N/A 35 to 85% RH, Storage: 35 to 85% RH (No freezing or Condensation) N/A 35 to 85% RH, Storage: 35 to 85% RH (No freezing or Condensation)
Sensing Target N/A
Beam Spot Size N/A
Features N/A
  • Realization of long sensing distance (2 m) by special optical design
  • IP64 protection rating (IEC standard)
  • Built-in stability indicator
  • Sensitivity adjustment function
  • 2 color display
 		N/A
  • Outstanding color matching accuracy
    • R.G.B light emitting diodes and 12-bit resolution
    • 2 detection modes (color only / color + intensity)
    • 3-step sensitivity adjustment for each mode (fine, normal, rough)
  • External light interference reduction minimizes errors and allows stable detection
  • Check reference color with teaching indicator
  • Operation indicator (red), stability indicator (green), timer indicator (orange)
  • Configure operation functions with external input from wiring
  • W 1.24 x L 6.7 mm spot size for detection of tiny targets and color marks
  • IP67 protection rating (IEC standard)
 		N/A
  • Small and power supply built-in type
  • Easy installation with indicators on product
  • Light ON/Dark ON mode selectable by switch
  • Status and output indication
  • Built-in IC photo diode for disturbing light and electrical noise
 		N/A
  • Easy front (M18 nut) and side (M3 bolt/nut) installation
  • NPN open collector/ PNP open collector simultaneous output
  • Sensing distance: Through-beam type 20 m / Polarized retro reflective type 4 m/Diffuse reflective type 1 m, 300 mm
  • Small size: W 14 X H 34.5 X L 28 mm
  • M.S.R. (Mirror Surface Rejection) function prevents malfunction from reflective objects such as metals or mirrors (polarized retro reflective type)
  • Built-in sensitivity adjuster
  • Light ON/Dark ON selectable by switch
  • Operation indicator (red), stability indicator (green)
  • Reverse power protection circuit, output short overcurrent protection circuit
  • Mutual interference prevention function (except through-beam type)
  • IP67 protection rating (IEC standard)
 		N/A
  • Compact size: W 10.6 x H 32 x L 20 mm
  • IP65 protection rating (IEC standard)
  • Adjuster for selecting Light ON/Dark ON mode
  • Built-in sensitivity adjustment adjuster (except BJG30-DDT)
  • Reverse power protection circuit, output short overcurrent protection circuit
  • Mutual interference prevention function (except through-beam and BGS reflective type)
  • Excellent noise immunity and minimal influence from ambient light