Barker Controls, Inc.
Barker Controls, Inc.
Address: 2205 Old Buncombe Road
Greenville, SC 29609
Phone: 800-845-5274
Fax: 864-242-1134
Email: Sales@BarkerControls.com
Website: www.barkercontrols.com
Print Back
Typically, 60-tooth, 16-pitch gears provide the optimum characteristics for RPM measurement, but other gear types can serve special application needs. They are well suited for industrial machinery as well as test stand and laboratory installations. Series 7143 is available in a plastic tube model, supplied with mounting bracket, or in threaded stainless-steel model. Both include a 10-foot shielded cable with mating connector.
Unit of Measure

Technical Specs

Brands

 N/A
Dynapar™

Model

 N/A 7143

Type

 N/A Magnetic Sensor

Output Voltage

 N/A 25 VDC minimum peak to peak (into 100 kΩ load) with 16-pitch gear, 1000 RPM, 0.01" gap

Maximum Direct Current (DC) Resistance

 N/A 1,200 Ω

Maximum Inductance

 N/A 400 mH

Temperature Range

 N/A -100 to 225 ºF-73 to 107 ºC

Connections

 N/A 10' Cable Sssembly (Supplied)

Features

N/A

  • High output gear tooth sensor
  • Requires no power Supply
  • For low RPM measurement

Additional Information

N/A Series 7143 features an extra strength permanent magnet pole-piece and high inductance coil. Gear teeth supply the motion within the magnetic field, so that the sensor/ gear combination acts as an AC generator. Voltage output is directly proportional to velocity and closeness of the air gap.