Barker Controls, Inc.
Barker Controls, Inc.
Address: 2205 Old Buncombe Road
Greenville, SC 29609
Phone: 800-845-5274
Fax: 864-242-1134
Email: Sales@BarkerControls.com
Website: www.barkercontrols.com
Print Back
The universally applicable industrial incremental encoders in the RI58 family are characterized by being particularly flexible. There are a number of different versions offering a range of flanges and connections. These encoders are suitable for high shock loads and feature high signal accuracy and up to 40,000 steps with 10,000 marks and are particularly well suited to use in machine tools, CNC axes, packaging machines, motors / drives, injection moulding machines and sawing machines.
Unit of Measure

Technical Specs

Brands

 N/A
Hengstler

Model

 N/A RI58-D

Type

 N/A Incremental Encoder

Number of Pulses

 N/A 1 10 100 1000 1024 125 1250 128 144 150 1500 180 1800 20 200 2000 2048 25 250 2500 256 3 30 300 3000 314 3480 35 360 3600 375 4 40 400 4000 4096 45 460 480 5 50 500 5000 512 60 600 625 64 70 72 720 80 900

Note for Number of Pulses

 N/A Other number of pulses on request
Preferably available versions are printed in bold type.

Overall Length

 N/A 33 mm

Certification

 N/A

Mechanical

Housing Diameter

 N/A 58 mm

Shaft Diameter (Hub Shaft)

 N/A 6 mm8 mm10 mm12 mm14 mm15 mm

Shaft Diameter (Hollow Shaft)

 N/A 10 mm12 mm6 mm8 mm

Note for Shaft Diameter

 N/A Other shaft diameters on request.

Flange (Mounting of Housing)

 N/A Synchro Flange

Mounting of Shaft

 N/A Front clamping ring, Rear clamping ring, Center bolt

Protection Class Shaft Input (EN 60529)

 N/A Ingress Protection (IP64)

Protection Class Housing (EN 60529)

 N/A Through Hollow Shaft: D, H: Ingress Protection (IP64)
Hub Shaft: E: Ingress Protection (IP65), F: Ingress Protection (IP67)

Maximum Speed

 N/A Hub Shaft - E, F: max. 6,000 rpm
Through hollow shaft - D, H: max. 4,000 rpm

Note for Maximum Speed

 N/A Higher values available upon request

Typical Starting Torque

 N/A ≤ 1 N·cm (Hub shaft - E, F)
≤ 2 N·cm (Through hollow shaft - D, H)

Approximate Moment of Inertia

 N/A 35 g/cm² (Hub shaft with clamping ring front - F)
20 g/cm² (Hub shaft, mounting with set screw - E)
60 g/cm² (Through hollow shaft with clamping ring front - D, H)

Housing Material

 N/A Aluminum

Applications

N/A Actuators, motors

Features

N/A

  • Direct mounting without coupling
  • Flexible hollow shaft design up to diameter 15 mm
  • Through hollow shaft or as end shaft (blind shaft)
  • Easy installation by means of clamping shaft or blind shaft
  • Fixing of flange by means of a stator coupling or set screw
  • Various shaft versions
  • Operating temperature up to +100 ºC (RI58TD); up to -40 ºC (RI58CD)