Print Back
Unit of Measure

Technical Specs

Brands

N/A
Autonics

Model

N/A BD-C

Type

N/A Communication Converter

Power Consumption

N/A ≤ 2.3 W

Function

N/A Executes every BD-Series feature, sets parameter and real-time monitoring by external device (Master)

Ambient Temperature

N/A -10 to 50 ºC, Storage: -15 to 60 ºC (No Freezing or Condensation)

Ambient Humidity

N/A ≤ 85% RH, Storage: ≤ 85% RH (No Freezing or Condensation)

Vibration

N/A 1.5 mm amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours

Shock

N/A 300 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times

Protection Structure

N/A Ingress Protection (IP40) (International Electrotechnical Commission (IEC Standard))

Material

N/A Case: Polycarbonate (PC)

Certification

N/A

Features

N/A

  • Supports both RS232C and RS485 communication in one device
    • Separate ports for RS232C and RS485
  • Connect up to 8 amplifier units
  • Can be powered directly by amplifier units without additional wiring
  • Support for dedicated device management software (at Displacement)
    • Batch parameter settings with save/load function
    • Monitor measured values and outputs in real-time
  • Set communication speed and addresses using DIP switch without connecting to host devices
Sensor head model BD-300/600 supports only over 5.0 firmware version of the amplifier unit (BD-A1).