Unit of Measure
Items
Image

ABL Series 1-Point Relay Screwless Type Terminal Block

ABS Series 4/16/32-Point Relay Terminal Block

ABS Series 4/16/32-Point Relay Terminal Block

ACL Series Common Screwless Type Terminal Block

ACL Series Common Screwless Type Terminal Block

ACR Series Common Rising Clamp Terminal Block

ACR Series Common Rising Clamp Terminal Block

AFS Series Interface Terminal Block

AFS Series Interface Terminal Block
Description N/A
Brands N/A Autonics
Model N/A ABL N/A ABS N/A ACL N/A ACR N/A AFS
Type N/A Terminal Block
Terminal Type N/A Screwless N/A N/A N/A N/A
Connector Type N/A Screwless N/A N/A N/A N/A Hirose Connector
Number of Relay Points N/A 1 N/A N/A N/A N/A
Power Supply N/A 24 VDC = ±10% N/A N/A N/A N/A
Rated Load Voltage and Current N/A 250 VAC ~ 50/60 Hz 3A, 30VDC = 3A N/A N/A N/A N/A
Note for Rated Load Voltage and Current N/A Relay load capacity for resistive load. N/A N/A N/A N/A
Current Consumption N/A ≤ 8 mA N/A N/A N/A N/A
Note for Current Consumption N/A The current consumption including LED current by one relay. N/A N/A N/A N/A
Output Type N/A 1A contact relay output N/A N/A N/A N/A
Continuous Current N/A
Indicator N/A
Insulation Resistance N/A N/A ≥ 1,000 MΩ (500 VDC, Megger) N/A ≥ 1,000 MΩ (500 VDC, Megger) N/A ≥ 1,000 MΩ (500 VDC, Megger) N/A ≥ 1,000 MΩ (500 VDC, Megger)
Dielectric Strength (Coil-Contact) N/A N/A 3,000 VAC ~ 50/60 Hz for 1 minute N/A N/A N/A
Vibration N/A N/A 0.75 mm amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z direction for 2 hours N/A 0.75 mm amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours N/A 0.75 mm amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours N/A 0.75 mm amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours
Vibration (Malfunction) N/A N/A 0.75 mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 10 minutes N/A 0.75 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 10 minutes N/A 0.75 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 10 minutes N/A 0.75 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 10 minutes
Shock N/A N/A 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times N/A 150 m/s² (≈ 15 G) in each X, Y, Z direction for 3 times N/A 150 m/s² (≈ 15 G) in each X, Y, Z direction for 3 times N/A 150 m/s² (≈ 15 G) in each X, Y, Z direction for 3 times
Shock (Malfunction) N/A N/A 147 m/s² (≈ 15 G) in each X, Y, Z direction for 3 times N/A 100 m/s² (≈ 10 G) in each X, Y, Z direction for 3 times N/A 100 m/s² (≈ 10 G) in each X, Y, Z direction for 3 times N/A 100 m/s² (≈ 10 G) in each X, Y, Z direction for 3 times
Ambient Temperature N/A N/A -15 to 55 ºC, Storage: -25 to 65 ºC (No Freezing or Condensation) N/A -15 to 55 ºC, Storage: -25 to 65 ºC (No Freezing or Condensation) N/A -15 to 55 ºC, Storage: -25 to 65 ºC (No Freezing or Condensation) N/A -15 to 55 ºC, Storage: -25 to 65 ºC (No Freezing or Condensation)
Ambient Humidity N/A N/A 35 to 85% RH, Storage: 35 to 85% RH (No freezing or Condensation) N/A 35 to 85% RH, Storage: 35 to 85% RH (No freezing or Condensation) N/A 35 to 85% RH, Storage: 35 to 85% RH (No freezing or Condensation) N/A 35 to 85% RH, Storage: 35 to 85% RH (No freezing or Condensation)
Rated Voltage N/A N/A N/A ≤ 250 VDC =, 250 VAC~ 50/60 Hz N/A ≤ 250 VDC, 250 VAC~50/60 Hz N/A ≤ 125 VDC, 125 VAC ~ 50/60 Hz
Rated Current N/A N/A N/A ≤ 10 A N/A ≤ 10 A N/A ≤ 1 A
Dielectric Strength N/A N/A N/A 3,000 VAC ~ 50/60 Hz for 1 minute N/A 3,000 VAC ~ 50/60 Hz for 1 minute N/A 2,700 VAC ~ 50/60 Hz for 1 Minute
Output Method N/A
Number of Connector Pins N/A
Features N/A N/A
  • Suitable for operating various loads using output signal of PLC
  • Easily check operation status with high luminance LED which turns on with input signals
  • Available to select from various kinds of relay according to the voltage and current of each load
  • DIN rail mount and screw mount methods
N/A
  • Screwless push-in type connection for simple and easy connection
  • Common wiring on PCB, jumper bar not required
  • Space-saving design with 5 mm terminal pitch and 2-line arrangement
  • DIN rail mount and screw mount installation
N/A
  • Rising clamp type connection method offers easy and durable connection
  • Common wiring on PCB, jumper bar not required
  • Space-saving design with 5 mm terminal pitch and 2-line arrangement
  • DIN rail mount and screw mount installation
N/A
  • Screw type connection for stable and reliable connection
  • Ideal for PLCs and motion device I/O
  • Compact, space-saving design
  • Excellent environment resistance against dust and debris by hinged cover
  • DIN rail mount and screw mount installation
Autonics CH/CO series I/O terminal block cables are recommended for best performance.