Unit of Measure

Technical Specs

Brands

N/A
Autonics

Model

N/A UTR

Type

N/A Controller

Insulation Resistance

N/A ≥ 50 MΩ (500 VDC, Megger)

Dielectric Strength

N/A Between the charging part and the case 1,000 VAC~50/60 Hz for 1 minute

Vibration

N/A 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours

Shock

N/A 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times

Ambient Temperature

N/A -25 to 70 ºC, Storage: -40 to 85 ºC (No Freezing or Condensation)

Connection

N/A Connector Models

Connector Specification

N/A M12 5-Pin Plug Connector

Certification

N/A

Features

N/A

  • Detect and measure various material and surface types with ultrasonic sensing
  • Sensing distance (by mount diameter)
    • Ø 18 mm : 120 to 1,300 mm
    • Ø 30 mm : 600 to 8,000 mm
  • Temperature compensation (auto/manual) and detection width conversion function for high accuracy
  • 316L stainless steel body for high corrosion resistance
  • 360º ring type indicator to check operation status from any directions
  • Digital output (Push-Pull) support
  • IO-Link models available
  • Simultaneous digital and analog output models available
  • Configure settings and monitor status with ultrasonic sensor programming units (UT-P)
  • Dedicated software provided (atDistance)
  • IP67 protection rating