| Items |
 /Asset/LCE.png LCE Model LCE Linear Measurement Cable Encoder |
 /Asset/LCX80.png LCX80 Model LCX80 Draw Wire Encoder |
 /Asset/LCX120.png LCX120 Model LCX120 Draw Wire Encoder |
 /Asset/LCX135.png LCX135 Model LCX135 Draw Wire Encoder |
 /Asset/TR1.png TR1 Model TR1-TRU-TRAC™ Linear Measurement Encoder |
|||||
| Description | The Linear Cable Encoder (LCE) provides a low cost alternative for obtaining accurate linear measurements. As opposed to typical rotary shaft style encoders, the LCE has a retractable stainless steel cable, allowing for numerous measuring configurations. You can place the LCE away from harsh environmental conditions, while still providing precise measurements, giving the LCE an outstanding advantage over shaft-style encoders. Installation is easy with a variety of cable exit directions, and perfect parallel alignment is no longer necessary. The heart of the LCE is the popular Cube Accu-Coder™, the original cube style encoder. The LCE provides a reliable digital pulse train in either single channel or quadrature format, with resolutions down to 0.002" per cycle. The small overall size, a variety of resolutions, and many different connector types, makes the versatility of the LCE unbeatable. | Available in wire lengths from one meter to 42.5 meters, the LCX draw wire is compatible with the following 58 mm shafted encoders with clamping flange: absolute encoder Model A58SE, which offers EtherNet/IP™, EtherCAT®, and PROFINET® communication protocols; Model A58SB, an absolute bus encoder that offers CANopen®, CAN SAE J1939, or SSI communication protocols with stainless and IP69K options available; Model 758, a high-performance incremental encoder; and the Model 858S, a stainless steel incremental encoder. Choose the right encoder and wire length for your application. | Available in wire lengths from one meter to 42.5 meters, the LCX draw wire is compatible with the following 58 mm shafted encoders with clamping flange: absolute encoder Model A58SE, which offers EtherNet/IP™, EtherCAT®, and PROFINET® communication protocols; Model A58SB, an absolute bus encoder that offers CANopen®, CAN SAE J1939, or SSI communication protocols with stainless and IP69K options available; Model 758, a high-performance incremental encoder; and the Model 858S, a stainless steel incremental encoder. Choose the right encoder and wire length for your application. | Available in wire lengths from one meter to 42.5 meters, the LCX draw wire is compatible with the following 58 mm shafted encoders with clamping flange: absolute encoder Model A58SE, which offers EtherNet/IP™, EtherCAT®, and PROFINET® communication protocols; Model A58SB, an absolute bus encoder that offers CANopen®, CAN SAE J1939, or SSI communication protocols with stainless and IP69K options available; Model 758, a high-performance incremental encoder; and the Model 858S, a stainless steel incremental encoder. Choose the right encoder and wire length for your application. | With operating speeds up to 3000 feet per minute and a wide variety of configuration options, the TR1 Tru-Trac™ is the versatile solution for tracking velocity, position, or distance over a wide variety of surfaces in almost any application. An integrated encoder and spring-loaded measuring wheel assembly available in one unit, the TR1 is both easy-to-use and compact. Plus, the TR1 housing is a durable, conductive composite material that will eliminate static build up. Its spring-loaded torsion arm offers adjustable torsion load, allowing the TR1 to be mounted in almost any orientation - even upside-down. And the threaded shaft on the pivot axis is easily reversible in the field, providing mounting access from either side. The TR1 is your solution for a compact, linear encoder. | |||||
| Model | LCE | LCX80 | LCX120 | LCX135 | TR1 | |||||
| Type | Linear Cable Encoder | Draw Wire Encoder | Draw Wire Encoder | Draw Wire Encoder | Linear Measurement Encoder | |||||
| Full Stroke Length (FSL) | 50" standard. Longer measuring ranges may be available, please contact Customer Service. | |||||||||
| Finish | Black Powder Coated Aluminum | |||||||||
| Full Stroke Length (FSL) Accuracy (±) | 0.10 % | |||||||||
| Full Stroke Length (FSL) Repeatability (±) | 0.015 % | |||||||||
| Linear Resolution | Up to 500 cycles per inch (0.002" per cycle) | |||||||||
| Cable Material | 0.034" nylon coated stainless steel rope | |||||||||
| Maximum Typical Cable Tension | 20 oz | |||||||||
| Life (Cycles) | 1,000,000 predicted at zero angle cable exit | |||||||||
| Encoder Requirements | Clamping flange diameter 36 mm; Shaft diameter 10 mm; Shaft length 20 mm | Clamping flange diameter 36 mm; Shaft diameter 10 mm; Shaft length 20 mm | Clamping flange diameter 36 mm; Shaft diameter 10 mm; Shaft length 20 mm | |||||||
| Measurement Range | 1 (1000 mm) 2 (2000 mm) 3 (3000 mm) | 4 (4000 mm) 5 (5000 mm) | 10 m12 m15 m20 m25 m30 m35 m40 m42.5 m6 m7 m8 m | |||||||
| Sheave Circumference | 200 mm | 317.68 mm | 333.33 mm357.14 mm6 to 8 m10 to 42.5 m | |||||||
| Linearity with Encoder Output (±) | 0.05 % | 0.05 % | 0.05 % | |||||||
| Extraction Force Fmin | 4.2 to 5 N | 8 N | 4.2 to 5 N | |||||||
| Extraction Force Fmax | 1 m Wire = 5.4 N 2 to 3 m Wire = 6.4 N | 4 m = 11 N 5 m = 11.6 N | 10 to 12 m Wire = 7.2 N 15 m Wire = 11.2 N 20 m Wire = 9.2 N 25 m Wire = 11.4 N 30 m Wire = 9.6 N 35 m Wire = 11.6 N 40 to 42.5 m Wire = 9 N 6 m Wire = 7.8 N 7 or 8 m Wire = 8.2 N | |||||||
| Velocity Vmax | 8 m/s | 8 m/s | 10 to 15 m Wire = 6 m/s 20 to 42.5 m Wire = 5 m/s 6 to 8 m Wire = 8 m/s | |||||||
| Acceleration amax | 8 m/s² | 8 m/s² | 10 to 15 m Wire = 80 m/s² 20 to 42.5 m Wire = 60 m/s² 6 to 8 m Wire = 120 m/s² | |||||||
| Housing | Aluminum Anodized Spring Case PA6 | Aluminum Anodized Spring Case PA6 | Aluminum Anodized Spring Case PA6 | Stainless steel fibers in a high temperature nylon composite | ||||||
| Wire Material | Flexible Stainless Steel Wire | Flexible Stainless Steel Wire | Flexible Stainless Steel Wire | |||||||
| Corrosion Protection | Standard housing, V4A wire material, stainless steel bearings, and HARTCOAT® coating on wire drum | Standard housing, V4A wire material, stainless steel bearings, and HARTCOAT® coating on wire drum | Standard housing, V4A wire material, stainless steel bearings, and HARTCOAT® coating on wire drum | |||||||
| Maximum Linear Speed | ||||||||||
| Maximum Shaft Speed | 6000 rpm. Higher speeds may be achievable - contact Customer Service. | |||||||||
| Shaft Material | Stainless Steel | |||||||||
| Radial Shaft Load | 5 lb max. Rated load of 2 to 3 lb for bearing life of 1.2 x 1010 revolutions | |||||||||
| Axial Shaft Load | 5 lb max. Rated load of 2 to 3 lb for bearing life of 1.2 x 1010 revolutions | |||||||||
| Wheel Width | 0.25 in | |||||||||
| Standard Wheel Width | ||||||||||
| Storage Temperature | -25 to 85 ºC | |||||||||
| Non-Condensing Relative Humidity | 98 % | |||||||||
| Vibration | 10 g @ 58 to 500 Hz | |||||||||
| Shock | 80 g @ 11 ms duration | |||||||||
| Common Applications | Robotics, Extrusion Presses, Valve Positioning, Textile Machinery, Control Gate Positioning |
Robotics, Extrusion Presses, Textile Machinery, Control Gate Positioning, Theater Stages, Elevators, Gantries, Boom Cranes, Fork Lift Booms The LCX Series of Draw Wire Solutions is manufactured for EPC by our German technology partner. |
Robotics, Extrusion Presses, Textile Machinery, Control Gate Positioning, Theater Stages, Elevators, Gantries, Boom Cranes, Fork Lift Booms The LCX Series of Draw Wire Solutions is manufactured for EPC by our German technology partner. |
Robotics, Extrusion Presses, Textile Machinery, Control Gate Positioning, Theater Stages, Elevators, Gantries, Boom Cranes, Fork Lift Booms The LCX Series of Draw Wire Solutions is manufactured for EPC by our German technology partner. |
Web Tension Control, Paper Monitoring, Glue Dispensing, Linear Material Monitoring, Conveyor Systems, Printing, Labeling, Document Handling | |||||
| Features |
|
|
|
|
|
|||||
|
|
||||||||||
